[Case Study] How to Connect 2 Network with 3 Router in Packet Tracer 7

1. Please Set IP Address according to the picture above.
2. Connect each device with cross cable according to the picture above.
3. Make sure you connect each port of the devices correctly.
4. Go to the R1 and Tab CLI. Execute this command:

Router>en
Router#conf
Router(config)#ip route 192.168.2.0 255.255.255.0 172.10.10.1

5. Go to the R2 and Tab CLI. Execute this command:

Router>en
Router#conf
Router(config)#ip route 192.168.1.0 255.255.255.0 172.10.10.2
Router(config)#ip route 192.168.2.0 255.255.255.0 10.10.10.2

6. Go to the R3 and Tab CLI. Execute this command:

Router>en
Router#conf
Router(config)#ip route 192.168.1.0 255.255.255.0 10.10.10.1

7. Check connection between PC

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.